SolaX Power bietet über ihr Onlineportal Solax Cloud eine Möglichkeit, deine Zählerdaten direkt an uns zu übertragen. Das gilt für alle SolaX Wechselrichter sowie den Q CELLS HYB-G3.

Vorbereitung

Um deine Zählerdaten an uns zu übertragen, benötigst du lediglich die Registrierungsnummer deiner Anlage.

Die Registrierungsnummer findest du unter dem Menüpunkt [Device]:

Einbindung

Die Registrierungsnummer musst du einfach nur bei uns eintragen. Falls du einen Stromspeicher besitzt, wird dieser automatisch erkannt, wenn die Batterie beim Einrichten einen Ladezustand von mehr als 0% aufweist.

Introduction

The data transmission between SolaX inverters and the cloud platform is realized by the Pocket Dongle, which uploads the latest data to SolaX Cloud every 5 minutes or immediately when the system has fault reported. However, if you use the latest Pocket Dongle, you can set 10s data refreshed on SolaX Cloud.

Advantages

Real-time monitoring

This function can provide you with a better experience, presenting more detailed system changes and monitoring home energy flow status in real time.

Rapid troubleshooting

When the system meets faults or data exceptions, you can quickly detect anomalies in the parameters, and it is more convenient to troubleshoot and locate the problems.

Settings

Step 1

Log in to the cloud platform and click the System & Site in the left navigation part. Then find your site and click the icon indicated by the arrow in the figure below to enter the Statistical Range interface.

Step 2

Turn on the Live Data function in this Statistical Range interface. Before that, you need to check whether your Dongle is our latest products: Pocket Wi-Fi 3.0, Wi-Fi + LAN, and Wi-Fi+4G, only these 3 latest Dongles support the 10s refreshed. They can be distinguished by their registration numbers, which starts with 'SN'/ 'SS' /SM' respectively.

Note: The Wi-Fi 3.0 which registration number starts with 'SV'/'SR' does not support 10s refreshed.